Automatic Plane Hexin Plywood Case Die Cutting Price Cut Machine

Basic Info

Model NO.	HX-320
Computerized	Non-Computerized
Automatic Grade	Automatic
Application	Paper Packaging Materials, Stickers Products, Heat Insulation Material, Insulating Materials, Dust-proof Material, EMI Shielding Materials
Slitting Speed	75m/Min
Die Cutting Speed	70m/Min
Max Web Width	320mm/120mm
Die Cutting Length	178-470mm
Dimension	1200*730*1130mm
Transport Package	Plywood Case
Specification	CE/ ISO
Trademark	HEXIN
Origin	Kunshan Jiangsu China
Production Capacity	100 Sets/Month

Product Description

cheap Manual discharge Sheet plate plane die cutting machine

Feature

This machine integrates multi-layer lamination and partial lamination, and the discharge-film-die cutting-waste
discharge-slicing-rewinding is controlled by a computer at one time.Features:
Multi-function in ONE machine: Laminating / partial laminating+unwinding+laminating+die cutting +discharging sheet
cutting/rewinding
Photo Cell if necessary .Sucking device during material feeding process
Waste discharge shaft. Sheet cutting station
Rewinding station .Safety curtain device
Optional function: Conveyor belt device for full-cut use

Application:
Glue-based products: 3C parts, foot pad, silicone, velcro backing, conductive tape, double-side tape,3M tape and all kinds of glue-based products.
Dustproof materials: cosmetic cotton, camera cotton, high density sponge, filtering sponge, dustproof filter, non-woven fabric,etc.
Shockproof materials: EVA tape, rubber cushion, PORON cushion,3M, flame-resistant EVA, EPDM,etc.
Insulation/shielding materials : EMI Shielding material, fireproof paper, aluminum foil, copper foil, PVC,PET, k paper, sponge sheath, pearl cotton sheath and so on.
Heat-conductive/ heat-proof materials : silicon sheet, transparent mica, fiber cloth, heat insulation cotton and so on.
Other materials which are suitable for die cutting

Model	320B
Cutting speed	20-100 (t/m)
Mold cut width	320mm
Max mould cutting area	300*300mm
Orientation accuracy	±0.10mm
Motor power	3kw
Power voltage	220v±10%
Machine weight	200kg
Measurement	1200x730x1130mm

Product Description

The working principle of the flat die-cutting machine is: the product model that has been opened according to the product drawing in advance is stamped into the specified shape by means of upper and lower stamping. The entire operation process of the die-cutting machine is driven by the servo motor to pull the material to drive the automatic feeder to feed. , Passing through the feed can complete some actions of the film, passing through the die-cutting machine of the die-cutting machine, draining the waste of the frame, and cutting into pieces to complete some of the entire process. Compared with other die-cutting equipment, the flat die-cutting machine has the advantages of convenient operation, convenient maintenance,easy replacement of die-cutting indentation plates, suitable for materials of different weights, and precise die-cutting, so it has been widely used

Die-cutting machines are also called beer machines and CNC punching machines. They are mainly used for die-cutting (full-break, half-break) and pressing of corresponding non-metallic materials, stickers, EVA,double-sided tape, electronics, mobile phone pads, etc. Marking and bronzing operations, laminating, automatic waste discharge,the die-cutting machine uses steel knives, metal molds, steel wires (or stencils carved from steel plates), and applies certain pressure through the embossing plate to cut the printed products or cardboard into Certain shape. It is an important equipment for post-press packaging processing and shaping.
The working principle of die-cutting machine is to use steel knives, hardware molds, steel wires (or stencils carved from steel plates) to apply certain pressure through the embossing plate to roll and cut printed products or cardboard into certain shapes.If the entire printed product is press-cut into a single graphic product, it is called die-cutting; if the steel wire is used to make traces on the printed product or leave a bent groove, it is called indentation; Heated to a certain temperature, hot stamping of patterns or fonts with a three-dimensional effect on the surface of the printed product is called hot stamping; if one substrate is used to overlay another substrate, it is called laminating; except for the genuine product, the rest is called To discharge waste; the above can be collectively referred to as die cutting technology.

Die Cutting Machine , also known as cutting machine, CNC punching machine, is mainly used for die-cutting (completely broken) of corresponding non-metallic materials, stickers, EVA, double-sided tape, electronics, mobile phone pads, etc. , Semi-broken),indentation and bronzing operations, laminating, automatic waste removal, die-cutting machine uses steel knives, hardware molds,steel wire (or a template carved from steel plates), and applies a certain pressure through the imprinting plate to print The product or cardboard is rolled and cut into a certain shape. It is an important equipment for post-press packaging processing and forming

The die-cutting process is the most commonly used process for packaging printed matter. It uses a die-cutting knife to combine the patterns required by the product design to form a die-cutting plate. Under pressure, the printed matter or other ring-packed blanks are rolled into the desired shape or The forming process of the cut marks. The creasing process is to use a crimping knife or a crimping die to make a line mark on the sheet through the action of pressure, or use a rolling wheel to bend and shape the board at a predetermined position. Usually, the die-cutting and creasing process is a process of combining the die-cutting knife and the crimping knife in the same template, and simultaneously performing die-cutting and creasing processing on the die-cutting machine, which is referred to as die-cutting.Process introduction The main process of die-cutting and indentation is:uploading→adjusting pressure→determining the rules→adhesive base material accessories→test pressure die-cutting→formal die-cutting and indentation→removing waste→finished product winding or cutting into pieces→points package

The working principle of the automatic flat-bed die-cutting machine is that the paper feeder feeds the paper into the front gauge and the side position through the paper feeding part, and then the paper is sent to the die-cutting mechanism by the tooth row for secondary positioning and die-cutting. After cutting, it is sent to the waste removal mechanism by the tooth row, and then enters the paper delivery section after the waste removal, thereby completing the die-cutting operation.Touch screen technology,frequency conversion speed regulation technology and programmable controller technology are widely used in the equipment, and the stability and reliability of the equipment have been greatly improved.Data communication between multiple programmable controllers of the die-cutting machine; LCD intelligent operation display screen,human-machine dialogue; use optical fiber sensor to detect the cursor, precise positioning; digital servo; holographic aluminum foil surface tension controlSample

Company ProfileKunshan Hexin Precise Machinery is an automated and intelligentized machinery manufacturing company which is specialized in research and development, production, sales and services of cutting machines, automatic slitting machines, thermal laminating machines, precise laminating machines and die cutting machines.In 2013, We got the certificate for "national high-tech enterprise". Our company has got nearly 20 patents and has passed the SGS factory qualification certification and the CE certificate. Our products are sold not only to the whole Chinese market, but also are exported to Germany, USA, UK, Spain, Turkey, Australia, Thailand, Canada, Argentina, Japan, South Korea and so on, more than 50 countries and areas. The machines are honored by the customers from home and aboard.
The headquarter is located in Kunshan city which is the TOP 1 in the "100 top country-level cities" in China. Our company covers more than 10,000 square meters. It is only 40minutes' away by car to Shanghai Hongqiao airport & Hongqiao railway station and 18 minutes' away by bullet high speed train to Shanghai rail station & Hongqiao railway station. We have sub-companies in Shanghai,Hangzhou, Tianjin, Wuhan, Chongqing, Dongguan. We also have agents in many foreign countries. Hexin machines have been spread to the whole Chinese market even to the whole world market.With advanced design concepts and manufacturing technology, after long years' improvement , Hexin machines are now at the top of world leading level in our industries. We own a high-qualified and young team which is composed of skilled technicians, senior R&D, sales and after-sales engineers.Our machines are widely applied in cutting, laminating, slitting, die cutting on materials such as shield materials, sticky materials, insulating materials, conductive materials, all kinds of films, metal foils, non-woven fabric, PVC, PET. They are used in the industries for 3C, rubber, auto car, printing, medical and so on.Exhibition

Our services:

1. Warranty Period: 12months;
2. A reply within 24 hours;
3. A free training in our factory before delivering
FAQ:

1
Q: Are you a manufacturer or trading company?
A: We are a manufacturer.

2
Q: Where is your factory located in? How can I get there?
A: Our factory is located in Kunshan which is very near from Shanghai, and our detailed address is: Factory 9, No. 157, Wulian Road, Yushan Town, Kunshan, Suzhou, Jiangsu, China. If you fly to Shanghai Hongqiao Airport or Pudong Airport, we can pick you up by car from there. we welcome all our clients form home and abroad to visit us.

3
Q: What are your main procducts?
A: Our main products are belt cutting machines, slitting machines, sheeting machines, laminating machines and die cutting machines.

4
Q:Which industries can use your machines?
A: All industries need to cut(including full-cutting and kiss-cutting), slit, laminate, die cut materials can use our machines.

5
Q: How to control the qualith in your factory?
A: Quality is priority. We control the quality of our products strictly, from the incoming materials to the finished products. Our factory has obtained CE and ISO certifications.

6.
Q: If there are no machines available from your list, could we customize non-standard machines from you?
A: Yes, we have our own professional design engineers, and can customize products according to your requirements